Tag Archives: 100)

CRL 3/16″ Plastic Screw Anchor Shoulder – 100

by

0

Our Best Selling Plastic Anchors Use with Wood or Sheet Metal Screws With Shoulders Year after year, these are our best-selling plastic anchors,
CRL Plastic Screw Anchors are designed to be used with wood or sheet metal screws ,
Their multiple-ribbed construction ensures secure holding power in hard or soft materials, from concrete to plaster,
They are available in two styles : the shoulderless anchors will fit flush to the surface, the type with shoulders keep the anchor from slipping through the hole,
3/16 and 1/4 inch (5 and 6 millimeter) sizes accommodate screw sizes from #4 through #10,

  • Binding:Misc.
  • Brand:C.R. Laurence
  • Feature:Our Best Selling Plastic Anchors
  • Feature:Use with Wood or Sheet Metal Screws
  • Feature:With Shoulders
  • Label:C.R. Laurence
  • ListPrice:
  • Manufacturer:C.R. Laurence
  • MPN:P1329C
  • PackageQuantity:1
  • PartNumber:P1329C
  • ProductGroup:Home Improvement
  • ProductTypeName:TOOLS
  • Publisher:C.R. Laurence
  • Studio:C.R. Laurence
  • Title:CRL 3/16″ Plastic Screw Anchor with Shoulder – 100 Each

TOGGLER BB SNAPTOGGLE Series Toggle Anchor, Steel,

by

0

The TOGGLER Snaptoggle BB toggle bolt wall anchor has a channel toggle head made of cold-rolled steel and a 265-lb,
ultimate tensile strength in 1/2″ drywall for hollow wall installation,
The toggle bolt anchor is suitable for installation in various hollow materials, including drywall, concrete and cinder block, and stucco,
It has a channel toggle head made of zinc-plated cold-rolled 1010 steel for strength and rust resistance, and it meets most national and local building codes,
The channel pivots so it is inline with two attached plastic straps for fitting through drilled holes in hollow wall installation,
The plastic straps pull the channel flush against the inside surface of walls to provide broader weight distribution,
A plastic flange cap helps the plastic strips to fit into the drilled hole from the outside, and prevents the channel from falling,
Once the cap is in place, the plastic straps can be broken off to allow bolting,
The toggle bolt wall anchor is suitable for use in the installation of shelving, grab bars, curtain rods, and other wall hangings in hollow walls and materials,

Anchors are a type of fastener used to attach objects and structures to a surface, often called the base material,
Selecting an appropriate type of anchor depends on the type and weight of fixture to be attached and on the surface, such as concrete, brick, drywall, or plaster,
Anchors are commonly divided into the categories of mechanical anchors and adhesive anchors,
Mechanical anchors use a mechanical feature such as grooves, an expanded end, or a hook to hold the anchor in place,
This category includes stud anchors, removable-bolt anchors, drive anchors, internally threaded anchors, plug anchors, screws, and toggle anchors,
Adhesive anchors use a bonding agent such as epoxy or acrylic to fill a drilled hole into which a metal bar called the anchor rod is inserted,
In industrial use, anchors hold machinery, tanks, and rack systems to walls and floors,
In bridge and highway construction, anchors fasten railings, barriers, and expansion joints in place,
In residential use, anchors attach lighting, plumbing fixtures, shelving, and home electronics to walls and ceilings,

TOGGLER Anchor System manufactures wall anchors and toggle bolts,
The company, founded in 1968, is headquartered in Norwalk, CT,

  • Binding:Misc.
  • Brand:TOGGLER
  • EAN:0036296240141
  • EANList:
  • Feature:Installs in smaller hole, only 1/2″ hole
  • Feature:Straps act as installation tool, help install metal channel behind the wall
  • Feature:Twice as strong as a regular toggle bolt – solid metal channel
  • Feature:Industry standards recommend allowable values 25% of the ultimate test load.
  • Feature:Tensile strength is 265 lbs. in 1/2″ drywall and 1080 lbs. in concrete block
  • ItemDimensions:
  • Label:Mechanical Plastics Corp.
  • ListPrice:
  • Manufacturer:Mechanical Plastics Corp.
  • MPN:24014
  • NumberOfItems:100
  • PackageDimensions:
  • PackageQuantity:1
  • PartNumber:24014
  • ProductGroup:BISS
  • ProductTypeName:MECHANICAL_FASTENERS
  • Publisher:Mechanical Plastics Corp.
  • Size:N/A
  • Studio:Mechanical Plastics Corp.
  • Title:TOGGLER BB SNAPTOGGLE Series Toggle Anchor, Steel, Meets FF-B-588D, 1/4″-20 Threads (Pack Of 100)
  • UPC:036296240141
  • UPCList:

Stainless Steel Sheet Metal Screw, Plain Finish,

by

0

Sheet metal screws have a pointed end and widely spaced threads,
They’re self-starting in thin sheet metal, but in thicker materials a drilled hole is recommended,

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness,
  These properties account for their extremely wide use in practically every industry,
Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0,
15% carbon, along with Nickel (or Manganese), and other alloying elements,
  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels,
   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e,
g,
304, 316),
  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc,
where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material,
    

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes,
Length is measured from the top of the head,
The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material,
Self-Drilling Points are excellent for use with sheet metal,

  • Binding:Misc.
  • Brand:Small Parts
  • Feature:Pointed end and widely spaced threads
  • Feature:Stainless Steel is suitable where formability and cost are important considerations
  • Feature:Flat head style allows fastener to sit flush to the surface
  • Feature:Phillips drive is designed to cam out under too much torque
  • Label:Small Parts
  • Manufacturer:Small Parts
  • MPN:B000NHXN40
  • NumberOfItems:100
  • PackageDimensions:
  • PackageQuantity:1
  • PartNumber:B000NHXN40
  • ProductGroup:BISS
  • ProductTypeName:SCREWS
  • Publisher:Small Parts
  • Size:#6
  • SKU:ZM4X06-12P-C
  • Studio:Small Parts
  • Title:Stainless Steel Sheet Metal Screw, Plain Finish, Flat Head, Phillips Drive, Self-Drilling Point, 3/4″ Length, #6-20 Threads (Pack of 100)

Steel Machine Screw, Zinc Plated Finish, Flat

by

0

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes,
They come in a variety of head types and drive styles, but are generally available in smaller sizes,

Steels are designated by a 4 number SAE Steel grade,
  The first two digits indicate the primary materials used to form the steel,
  The last 2 digits identify the percentage of carbon for the alloy (in hundredths),
  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch),
  Zinc Plating helps to prevent corrosion,

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes,
Length is measured from the top of the head,
The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material,

A threaded fastener’s size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine,
Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine,
Coarse threading also allows for thicker coatings and platings,

  • Binding:Misc.
  • Brand:Small Parts
  • EAN:0082893438566
  • EANList:
  • Feature:Machine Screws are often used with nuts or driven into tapped holes
  • Feature:Zinc Plated Steel fasteners are suitable where strength and corrosion resistance are primary considerations
  • Feature:Flat head style allows fastener to sit flush to the surface
  • Feature:Phillips drive is designed to cam out under too much torque
  • Feature:Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads
  • Label:Small Parts
  • Manufacturer:Small Parts
  • MPN:B000MN1QVW
  • NumberOfItems:100
  • PackageDimensions:
  • PackageQuantity:1
  • PartNumber:B000MN1QVW
  • ProductGroup:BISS
  • ProductTypeName:SCREWS
  • Publisher:Small Parts
  • Size:#12
  • SKU:ZFHP-1224-20-C
  • Studio:Small Parts
  • Title:Steel Machine Screw, Zinc Plated Finish, Flat Head, Phillips Drive, 1-1/4″ Length, #12-24 Threads (Pack of 100)
  • UPC:082893438566
  • UPCList:

Stainless Steel Machine Screw, Flat Head, Phillips

by

0

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes,
They come in a variety of head types and drive styles, but are generally available in smaller sizes,

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness,
  These properties account for their extremely wide use in practically every industry,
Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0,
15% carbon, along with Nickel (or Manganese), and other alloying elements,
  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels,
   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e,
g,
304, 316),
  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc,
where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material,
    

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes,
Length is measured from the top of the head,
The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material,

A threaded fastener’s size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine,
Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine,
Coarse threading also allows for thicker coatings and platings,

  • Binding:Misc.
  • Brand:Small Parts
  • Color:Silver
  • Feature:Machine Screws are often used with nuts or driven into tapped holes
  • Feature:Stainless Steel is suitable where formability and cost are important considerations
  • Feature:Flat head style allows fastener to sit flush to the surface
  • Feature:Phillips drive is designed to cam out under too much torque
  • Feature:Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads
  • Label:Small Parts
  • Manufacturer:Small Parts
  • MPN:B000FN7VVI
  • NumberOfItems:100
  • PackageDimensions:
  • PackageQuantity:1
  • PartNumber:B000FN7VVI
  • ProductGroup:BISS
  • ProductTypeName:SCREWS
  • Publisher:Small Parts
  • Size:#2-56
  • SKU:MPX-0256-03F-C
  • Studio:Small Parts
  • Title:Stainless Steel Machine Screw, Flat Head, Phillips Drive, #2-56, 3/16″ Length (Pack of 100)

Heavy-Duty Retrieving and Holding Magnet, 2″

by

0

Utilize by attaching a rope or chain to the eyebolt and go fishing for metal objects in tanks, barrels, reservoirs, waterways, or hard to reach places,
Hold and position spray nozzles, hoses, temporary wiring, and more,
Move parts in and out of degreasing tanks,
Or, use without eyebolt by attaching magnet to items through 1/4-20 tapped center hole on top of magnet,
Maximum operating temperature is 180 Fahrenheit,
For higher temperatures see high temperature, heavy-duty work holding magnet,
Magnet weighs 1 pound,

  • Binding:Misc.
  • Brand:Master Magnetics, Inc.
  • EAN:0095421075416
  • EANList:
  • Feature:Designed to retrieve and hold flat steel surfaces, nails, hand tools, and other ferrous items on contact
  • Feature:100 pounds pull rated on direct contact with 1/4″ thick, flat, and smooth ferrous steel plate while pulling magnet perpendicular to steel plate. Pounds of pull are less on thinner ferrous steel surfaces or steel with lower iron content. Layers of paint and other finishes decrease the pounds of pull.
  • Feature:Magnet assembly made of steel with all-welded construction, ceramic magnets, and red powder coat finish
  • Feature:Includes two Magnetic Shields to block magnetic strength when not in use, allowing easy storage in a toolbox without attracting other tools.
  • Feature:Maximum operating temperature is 180 Fahrenheit. For higher temperatures see high temperature, heavy-duty work holding magnet.
  • ItemDimensions:
  • Label:Master Magnetics, Inc.
  • ListPrice:
  • Manufacturer:Master Magnetics, Inc.
  • MPN:07541
  • NumberOfItems:1
  • PackageDimensions:
  • PackageQuantity:1
  • PartNumber:07541
  • ProductGroup:BISS
  • ProductTypeName:MATERIAL_HANDLING
  • Publisher:Master Magnetics, Inc.
  • Studio:Master Magnetics, Inc.
  • Title:Heavy-Duty Retrieving and Holding Magnet, 2″ Length, 2″ Width, 1″ Height with Eyebolt, Nut and Magnetic Shields, 100 Pounds Pull, 1 each
  • UPC:095421075416
  • UPCList:

Wej-It Stalgard Coated Carbon Steel Flat Head

by

0

The screw’s step thread design increases ease of installation and pull-out values,
A drill bit is included in every box,
When the screw is inserted into the hole, the screw cuts threads into the base material,
Can be used in poured concrete, brick, and block,

  • Binding:Misc.
  • Brand:Wej-It
  • EAN:0013918104975
  • EANList:
  • Feature:For static loads, it is recommended that a safety factor of 4:1 (one-fourth or 25%) be applied to the ultimate tensile & shear strengths shown
  • Feature:Fast, easy & consistent installations (no breaking or snapping))
  • Feature:Long-term corrosion resistance
  • Label:Wej-It
  • ListPrice:
  • Manufacturer:Wej-It
  • Model:FCS3621
  • MPN:FCS3621
  • NumberOfItems:100
  • PackageDimensions:
  • PartNumber:FCS3621
  • ProductGroup:BISS
  • ProductTypeName:SCREWS
  • Publisher:Wej-It
  • Size:#2
  • Studio:Wej-It
  • Title:Wej-It Stalgard Coated Carbon Steel Flat Head Concrete Screw, USA Made, #2 Phillips Drive, 3/16″ Diameter, 2-1/4″ Length, Pack of (100)
  • UPC:013918104975
  • UPCList:

Wej-It Stalgard Coated Carbon Steel Flat Head

by

0

The screw’s step thread design increases ease of installation and pull-out values,
A drill bit is included in every box,
When the screw is inserted into the hole, the screw cuts threads into the base material,
Can be used in poured concrete, brick, and block,

  • Binding:Misc.
  • Brand:Wej-It
  • EAN:0013918104784
  • EANList:
  • Feature:For static loads, it is recommended that a safety factor of 4:1 (one-fourth or 25%) be applied to the ultimate tensile & shear strengths shown
  • Feature:Fast, easy & consistent installations (no breaking or snapping)
  • Feature:Long-term corrosion resistance
  • Label:Wej-It
  • ListPrice:
  • Manufacturer:Wej-It
  • Model:FCS3613
  • MPN:FCS3613
  • NumberOfItems:100
  • PackageDimensions:
  • PartNumber:FCS3613
  • ProductGroup:BISS
  • ProductTypeName:SCREWS
  • Publisher:Wej-It
  • Studio:Wej-It
  • Title:Wej-It Stalgard Coated Carbon Steel Flat Head Concrete Screw, USA Made, #2 Phillips Drive, 3/16″ Diameter, 1-3/4″ Length, Pack of (100)
  • UPC:013918104784
  • UPCList:

Wej-It Stalgard Coated Coated Carbon Steel Hex

by

0

The screw’s step thread design increases ease of installation and pull-out values,
A drill bit is included in every box,
When the screw is inserted into the hole, the screw cuts threads into the base material,
Can be used in poured concrete, brick, and block,

  • Binding:Misc.
  • Brand:Wej-It
  • EAN:0013918108010
  • EANList:
  • Feature:For static loads use one-fourth (25%) of the ultimate tensile & shear strengths shown
  • Feature:Cuts threads in structural concrete, hollow block, brick, mortar, concrete masonry units and many others
  • Feature:Step thread design makes fast, easy & consistent installation
  • Label:Wej-It
  • ListPrice:
  • Manufacturer:Wej-It
  • Model:HCS3611
  • MPN:HCS3611
  • NumberOfItems:100
  • PackageDimensions:
  • PartNumber:HCS3611
  • ProductGroup:BISS
  • ProductTypeName:SCREWS
  • Publisher:Wej-It
  • Studio:Wej-It
  • Title:Wej-It Stalgard Coated Coated Carbon Steel Hex Washer Head Drive, Concrete Screw, USA Made,, 3/16″ Diameter, 1-1/4″ Length, Pack of (100)
  • UPC:013918108010
  • UPCList: