Kreg SK03 Pocket-Hole Screw Kit in 5 Sizes

This kit contains five of Kreg’s most popular self-tapping screw sizes for Pocket-Screw Joinery, all in a durable and easy-to-carry case,
All Kreg screws feature a deep No,
2 square drive, a needlepoint self-tapping tip, and a hard plastic case built for strength,
The kit comes complete with 150 count each of SPS-F1, SPS-C1, SML-F125, and SML-C125 screws as well as 75 count of SML-C250B screws,

• Binding:Tools & Home Improvement
• Brand:Kreg
• CatalogNumberList:
• EAN:0647096804299
• EANList:
• Feature:Contains 675 of 5 most used screws
• Feature:Includes self-tapping screw sizes for pocket-screw joinery
• Feature:All Kreg screws feature a deep No. 2 square drive
• Feature:Includes a durable easy-to-carry case
• Feature:Includes a a needlepoint self-tapping tip
• ItemDimensions:
• Label:Kreg
• ListPrice:
• Manufacturer:Kreg
• Model:SK03
• MPN:SK03
• NumberOfItems:1
• PackageDimensions:
• PackageQuantity:1
• PartNumber:SK03
• ProductGroup:Home Improvement
• ProductTypeName:TOOLS
• Publisher:Kreg
• SKU:SK03I
• Studio:Kreg
• Title:Kreg SK03 Pocket-Hole Screw Kit in 5 Sizes
• UPC:647096804299
• UPCList:

Steel Toggle Bolt, Made in US (Pack of 50)

Length : 1/4 X 3in

Oour strurdy Round Slotted Toggle Bolts,

• Round Slotted
• Spring-Wing Type
• Zinc Plated
• Round Slotted Toggle Bolts Order Qty of 50 = 1 Box of 50

• Binding:Misc.
• Brand:Morris Products
• CatalogNumberList:
• EAN:0601986308465
• EANList:
• Feature:Round slotted
• Feature:Spring-wing type
• Feature:Zinc plated
• ItemDimensions:
• Label:Morris Products
• Manufacturer:Morris Products
• MPN:30846
• NumberOfItems:50
• PackageDimensions:
• PartNumber:30846
• ProductGroup:BISS
• ProductTypeName:ELECTRONIC_COMPONENT
• Publisher:Morris Products
• SKU:30846
• Studio:Morris Products
• Title:Steel Toggle Bolt, Made in US (Pack of 50)
• UPC:601986308465
• UPCList:

Tie Down Engineering Pipe Holder Outside 3 In

PIPE HOLDER-OUTSIDE 3 IN,

• Binding:Misc.
• Brand:Tie Down Engineering
• Feature:PIPE HOLDER-OUTSIDE 3 IN.
• Feature:Bolts to outside of dock, Uses 2″ pipe to hold dock in place.
• Feature:Carriage bolt set M required for attaching.
• Label:TIE DOWN ENGINEERING
• ListPrice:
• Manufacturer:TIE DOWN ENGINEERING
• MPN:241-24280
• PartNumber:241-24280
• ProductGroup:Sports
• ProductTypeName:SPORTING_GOODS
• Publisher:TIE DOWN ENGINEERING
• SKU:ARLNS241-24280B22113
• Studio:TIE DOWN ENGINEERING
• Title:Tie Down Engineering Pipe Holder Outside 3 In Highest Quality Available Durable

Crown Bolt Nylon 5/16 in. -18 x 1/2 in. Hex Bolt

Amico 20 Pcs 9mm Hole Push in Expanding Screw

These rivet fasteners are made of plastic material, suitable for car use,
Car’s good accessory, commonly used for fitting side skirts, bumpers and other trim,
These clips are suitable for firmly holding anything within a fit diameter hole,
They can be used on buses, trains, planes, truck, caravans and cars,

• Brand:Amico
• EAN:0608641670523
• EANList:
• Feature:Product Name : Plastic Rivet;Material : Plastic
• Feature:Color : Black;Max. Diameter : 15mm/ 0.59″
• Feature:Fit Hole Diameter : 9mm/ 0.35″;Total Length : 25mm/ 1″
• Feature:Net Weight : 35g
• Feature:Package Content : 20 x Plastic Rivet
• Label:Amico
• Manufacturer:Amico
• MPN:sourcingmap
• PackageDimensions:
• PackageQuantity:1
• PartNumber:sourcingmap
• ProductGroup:Automotive Parts and Accessories
• ProductTypeName:AUTO_PART
• Publisher:Amico
• SKU:a12050900ux0047
• Studio:Amico
• Title:Amico 20 Pcs 9mm Hole Push in Expanding Screw Panel Clips Plastic Rivet Black
• UPC:608641670523
• UPCList:

V2016 #8, 1-5/8″ Large Screw Eye in Stainless

Whether for home, farm, builder or industrial customers, National has all the right hardware in the sizes and finishes you need,
With over a century of service National is committed to maintaining the highest level of product quality, innovation and manufacturing technology,
Providing latching and fastening options for all of your indoor and outdoor uses,
An industry-leading set of screw eyes in a host of sizes are offered in zinc-plated with proprietary Weather Guard, which has a three times higher corrosions resistance than the competition,
Along with zinc-plated, there is a strong contingent of solid brass and stainless steel screw eyes available,
Utilizing 300 series stainless steel with 18% chromium, which gives the corrosion protection as pure chromium in chrome plating,
These products will not corrode or rust when exposed to the weather,

• Binding:Tools & Home Improvement
• Brand:National Hardware
• CatalogNumberList:
• EAN:0038613197176
• EANList:
• Feature:Manufactured from stainless steel
• Feature:It has a Large eye
• Feature:Easy to install
• Feature:Large eye
• Feature:Easy installation
• Feature:LifeSpan Limited Lifetime Warranty
• Feature:Sharp eye points bite into wood easily and quickly
• ItemDimensions:
• Label:National Hardware
• Manufacturer:National Hardware
• Model:CD80
• NumberOfItems:1
• PackageDimensions:
• PackageQuantity:1
• ProductGroup:Home Improvement
• ProductTypeName:HARDWARE
• Publisher:National Hardware
• Studio:National Hardware
• Title:V2016 #8, 1-5/8″ Large Screw Eye in Stainless Steel
• UPC:038613197176
• UPCList:

1030 Carbon Steel Eyebolt, Not For Lifting, 3/8″-16

• Binding:Misc.
• Brand:Jergens
• Feature:Made In the U.S.A
• Feature:Eyebolts with shoulder can be used for vertical lifts as well as angular lifts typically up to 45 degrees
• Feature:For other than vertical loads, general practice is to use 60 percent of the safe working load factor for a load 30 degrees from vertical; 33 percent of vertical safe load for load 45 degrees from vertical; and 20 percent of vertical safe load for load 90 degrees from vertical
• Label:Jergens Inc.
• Manufacturer:Jergens Inc.
• MPN:18503
• NumberOfItems:1
• PackageDimensions:
• PackageQuantity:1
• PartNumber:18503
• ProductGroup:BISS
• ProductTypeName:BOLTS
• Publisher:Jergens Inc.
• Size:3/8″
• SKU:115-018503
• Studio:Jergens Inc.
• Title:1030 Carbon Steel Eyebolt, Not For Lifting, 3/8″-16 Threads, Made in US

303 Stainless Steel Eyebolt, Not For Lifting,

Square shoulder allows the bolt head to mount flush with any flat surface,
Used often to mount workpiece directly to machining table,
Material is 303 stainless steel,
Also called swing bolts,
Workholding components,
Clamping components,
Measures 2-5/16″ thread length by 2-7/8″ overall length,

• Binding:Misc.
• Brand:Small Parts
• Feature:Material is 303 stainless steel
• Feature:Also called swing bolts
• Feature:Workholding components
• Feature:Clamping components
• Feature:Measures 2-5/16″ thread length by 2-7/8″ overall length
• Label:Te-Co
• ListPrice:
• Manufacturer:Te-Co
• Model:43033
• MPN:B009SVYXAU
• NumberOfItems:2
• PackageDimensions:
• PackageQuantity:1
• PartNumber:B009SVYXAU
• ProductGroup:BISS
• ProductTypeName:BOLTS
• Publisher:Te-Co
• Size:1/4″
• Studio:Te-Co
• Title:303 Stainless Steel Eyebolt, Not For Lifting, 2-5/16″ Length, 1/4″ Eye ID, 2-5/16″ Thread Length, 1/4″-20 Threads, Made in US (Pack of 2)

1030 Carbon Steel Eyebolt, Not For Lifting, 1/4″-20

• Binding:Misc.
• Brand:Jergens
• Feature:Made In the U.S.A
• Feature:Eyebolts with shoulder can be used for vertical lifts as well as angular lifts typically up to 45 degrees
• Feature:For other than vertical loads, general practice is to use 60 percent of the safe working load factor for a load 30 degrees from vertical; 33 percent of vertical safe load for load 45 degrees from vertical; and 20 percent of vertical safe load for load 90 degrees from vertical
• Label:Jergens Inc.
• Manufacturer:Jergens Inc.
• MPN:18501
• NumberOfItems:1
• PackageDimensions:
• PackageQuantity:1
• PartNumber:18501
• ProductGroup:BISS
• ProductTypeName:BOLTS
• Publisher:Jergens Inc.
• Size:1/4″
• SKU:115-018501
• Studio:Jergens Inc.
• Title:1030 Carbon Steel Eyebolt, Not For Lifting, 1/4″-20 Threads, Made in US

C1030 Steel Eyebolt, Not For Lifting, Plain Finish,

• Binding:Misc.
• Brand:Jergens
• Feature:Made In the U.S.A
• Feature:Eyebolts with shoulder can be used for vertical lifts as well as angular lifts typically up to 45 degrees
• Feature:For other than vertical loads, general practice is to use 60 percent of the safe working load factor for a load 30 degrees from vertical; 33 percent of vertical safe load for load 45 degrees from vertical; and 20 percent of vertical safe load for load 90 degrees from vertical
• Label:Jergens Inc.
• Manufacturer:Jergens Inc.
• MPN:18505
• NumberOfItems:1
• PackageDimensions:
• PackageQuantity:1
• PartNumber:18505
• ProductGroup:BISS
• ProductTypeName:BOLTS
• Publisher:Jergens Inc.
• Size:5/8″
• SKU:115-018505
• Studio:Jergens Inc.
• Title:C1030 Steel Eyebolt, Not For Lifting, Plain Finish, 1-3/4″ Length, 1-3/8″ Eye ID, 1-3/4″ Thread Length, 5/8″-11 Threads, Made in US